Advantages and Disadvantages of Oil Coolers

Oil coolers perform the duty of removing surplus heat from oils, especially in vehicles that require constant performance. One of the major jobs of oil cooler is to ensure that the heat from the combustion engine does not overpower its performance. It also has to make sure that the heat does not fall below a certain level required for the car or vehicle to function. There are many other methods to cool down the atmosphere inside the car and people can employ the ones they like. Thus, there are many benefits and drawbacks to using oil coolers instead of other methods.

Oil cooler use oil instead of water to cool down the atmosphere and since the boiling point or temperature of oil is much higher than that of water, it can be used readily to cool things down. It will be able to perform its duties better due to this fact. Water usually boils at a hundred degrees but starts getting warmer much earlier. An oil cooler will stay cooler for a longer period of time. Some pressurized water coolers may be able to surpass the performance pelted out by oil coolers but that is usually much more expensive and costly.

Moreover, the problem with using water coolers is the fact that water is considered to be a conductor of electricity – and a very good one at that. If people use water coolers, there is a huge chance that some parts of the vehicle that work on electricity may come in contact with water and cause irreparable harm. To counter this, many people install separate coolers for the electric components in inside their appliances. An oil cooler, on the other hand, can be used to cool every single part of the equipment or appliance since it is an electricity insulator and can come in contact with electric components.

Another drawback to using water coolers is the amount of corrosion the cooler is likely to cause in the engine when it travels around. On the other hand, an oil cooler will actively work against corrosion and one will also not need to ensure that they regularly put oil on different components in the machine as oil will be running all over anyway. Thus, as opposed to water, oil is a much safer and better option. It will increase the working age of the vehicle and make it less rusty. Oil leaking in to parts will not cause much harm to anyone but water leakage may prove to be beyond deadly.

Since there are so many plus points to using oil coolers, there are many disadvantages as well. First up, it is not likely that the oil will cool anything over three hundred degrees because at that point, the oil will begin reaching its boiling point. Instead of making the individual parts in the equipment better, it will end up making the parts rusty and may leave behind ashy solids that can hamper the discourse of the vehicle. An oil cooler, therefore, is good up until a certain point. After that, it ceases to be anything extraordinary. It cannot work in every condition.

Lastly, oil coolers run with oil which can easily be degraded, become harmful to the parts in the vehicle and reduce the performance capability of the vehicle. On the other hand, water will not degrade – it may boil away or steam up but it will not become harmful to the vehicle itself. Also, oil may not conduct electricity but it is highly flammable; if the vehicle catches fire, it can prove to be very dangerous for the people travelling within because it can result in a huge blast. 

More marine services for oil coolers, click here.