Ultrasonic
cleaning is gaining popularity very quickly not
just because it is downright awesome in technology but also because it is
downright efficient and effective when it comes to consumption and output.
Furthermore, these machineries give long life in service making them very less
costly in comparison to more traditional alternatives. However, on the
downside, they are still not the pieces of machinery that clean them up. They
need human hands to serve the purpose. Here are a few things that one needs to
know in order to clean the ultrasonic
cleaning machine.
Avoiding
Rust Films:
It has been commonly observed that
household users make a terrible mistake when it comes to maintaining their
metal and water related machinery. And that is that they shy away from getting
rid of rust and corroded metal while cleaning their machinery. Doing this makes
the machine grow older by the minute and eventually making it next to useless.
Good models of ultrasonic cleaning
machinery have stainless steel containers that do not rust or corrode, at least
not in normal circumstances. Ferrous products that are normally cleaned from a
tap are the main cause of deposition of rust films.
The solution that is used
in the cleaning job done by ultrasonic
cleaning machinery is not the one to be used while cleaning the machine’s
container. This is a false perception that it can be. Stains can find their way
into the container very easily. In order to avoid them, it is better to clean
the container every now and then. As an extreme case and scenario, that the
stains are just too stubborn to go anywhere, it is advisable to pour water and
solution in the container and run the machine in heated mode. In most cases,
this does the trick just fine.
Mineral
Deposit:
The second common issue with ultrasonic cleaning devices is that
they are very severely prone to mineral deposition. Mineral gets deposited due
to cleaning of highly calciferous items in the cleaner that causes minerals to
deposit when these items come in contact with hot water. Actually the sudden
change in temperature causes this to happen. The best way to avoid this from
happening is to pace tings up in the spin. Due to this, heat does not get
focused on a single spot for much longer; instead it spreads evenly on all
places. Also, first turning on the ultrasonic system and then turning the heat
on does the same job that it spreads the heat evenly throughout the container.
Pinholes:
Possibly the most irritating problem, that
takes place while using ultrasonic
cleaning devices, is the puncturing of the container altogether. What
happens is that metal pieces that are cleaned often come in a close contact
with the container walls or floor and if they are hard enough, can cause
puncturing of the container. These holes decrease the efficiency and effectiveness
of the machine manifolds. In order to prevent this from happening, the best
thing is to simply use a basket when cleaning metallic items.
Doing this,
avoids direct contact of these hard items with walls and floor. But, it is
equally important that the basket does not come in contact with the floor and
walls of the cleaning container, otherwise the whole point goes in vein. Also,
acidic solutions slowly eat away the internal layers of the container and
weaken it every time it is used. They should be avoided in order to ensure a
longer usage life. taking these cautions, one can keep their claim or warranty
alive for its life span whether a year or more because mishandling and improper
usage of ultrasonic cleaning machines
expires the warranty claim.
No comments:
Post a Comment